The only application which together replaced by the spirit level, ruler, protractor, measuring the intensity of light and shock sensor. Required is, of course, motion and light sensor. The interface is clear and a maximum display area is fully used at each resolution. The calibration display for the ruler you need to know the diagonal measurement of your screen, you do not have anything to measure.
Applications to me so pleased that I created for her English translation. The attached "lang.ini" copy to folder with the installed program ( "\\ Program Files \\ Merlot \\ mToolbox") and replace its original.
The main screen offers all the possible components to run. The first spirit is showing deflection in degrees, including graphical representations. Useful is the "Hold" - the current value is frozen and you can read in peace / copy, as measured in the inconvenient position: o). If the values are inaccurate, place equipment on the absolutely flat surface, press the "calibrate" and follow the guide. Ruler from you first require a diagonal measurement of the screen, write it in the "Fill in here." If you are using the Czech regional settings ( "Regional Settings"), you may not use a comma as a decimal dot. Press "Calculate" to immediately display a ruler. You can switch to an inch, will be on edge. The red arrow at the bottom hides the bottom bar to make way rulers. Switching on the protractor to display the 180 ° section showing the value of equipment in accordance with tilt in all three axes. Here you can use the detention of a calibration. Light sensor lists the value of light in lumens ai text (dark, weak, natural and clear). If you fear an earthquake, there is the shock sensor. Green arrow and run it on the record scale in the graph. Equipment must of course lie on a flat surface. Press the red circle to start recording and information from the sensor will be stored in "\\ Program Files \\ Merlot \\ mToolbox \\ logfiles". Press the question mark to view an explanation of the axes.
If all modules need not be a problem in the settings to deactivate or activate. In addition, there is a possibility to disable the animation if you annoy (when entering the individual modules).
Applications have been problems with stability. When testing with me several times happened that spontaneously closed and it was necessary to restart the facility that it can be re-run. The author also notes that it is not a tool for precise measurement, but rather the application of entertaining nature.
Download It
0 Comment:
Post a Comment